User Tools

Site Tools


solaris:ddi_model_convert_from.9f

ddi_model_convert_from


NAME

ddi_model_convert_from - determine data model type mismatch

SYNOPSIS

#include <sys/ddi.h>
#include <sys/sunddi.h>

uint_tddi_model_convert_from(uint_t model);

INTERFACE LEVEL

Solaris DDI specific (Solaris DDI).

PARAMETERS

model

The data model type of the current thread.

DESCRIPTION

ddi_model_convert_from() is used to determine if the current thread uses a different C Language Type Model than the device driver. The 64-bit version of Solaris will require a 64-bit kernel to support both 64-bit and 32-bit user mode programs. The difference between a 32-bit program and a 64-bit program is in its C Language Type Model: a 32-bit program is ILP32 (integer, longs, and pointers are 32-bit) and a 64-bit program is LP64 (longs and pointers are 64-bit). There are a number of driver entry points such as ioctl(9E) and mmap(9E) where it is necessary to identify the C Language Type Model of the user-mode originator of an kernel event. For example any data which flows between programs and the device driver or vice versa need to be identical in format. A 64-bit device driver may need to modify the format of the data before sending it to a 32-bit application. ddi_model_convert_from() is used to determine if data that is passed between the device driver and the application requires reformatting to any non-native data model.

RETURN VALUES

DDI_MODEL_ILP32

A conversion to/from ILP32 is necessary.

DDI_MODEL_NONE

No conversion is necessary. Current thread and driver use the same data model.

CONTEXT

ddi_model_convert_from() can be called from any context.

EXAMPLES

Example 1 : Using ddi_model_convert_from() in the ioctl() entry point to support both 32-bit and 64-bit applications.

The following is an example how to use ddi_model_convert_from() in the ioctl() entry point to support both 32-bit and 64-bit applications.

struct passargs32 {
int len;
caddr32_t addr;
};

struct passargs {
int len;
caddr_t addr;
};
xxioctl(dev_t dev, int cmd, intptr_t arg, int mode,
cred_t *credp, int *rvalp) {
struct passargs pa;

switch (ddi_model_convert_from(mode & FMODELS)) {
case DDI_MODEL_ILP32:
{
struct passargs32 pa32;

ddi_copyin(arg, &pa32, sizeof (struct passargs32), mode);
pa.len = pa32.len;
pa.address = pa32.address;
break;
}
case DDI_MODEL_NONE:
ddi_copyin(arg, &pa, sizeof (struct passargs), mode);
break;
}

do_ioctl(&pa);
….
}

SEE ALSO

ioctl(9E), mmap(9E), ddi_mmap_get_model(9F)

Writing Device Drivers in Oracle Solaris 11.4


solaris/ddi_model_convert_from.9f.txt · Last modified: 2023/07/19 08:58 by A User Not Logged in